Get Inspired
With many smart, contemporary designs, PanelStyle has provided the distinguishing touch to some of the most utilised indoor areas within any building. Browse our Gallery to inspire your own design concept.
Do you have a question about PVC or the PanelStyle range? To help we have created this FAQ section to help find the information you are looking for.
Still can’t find your answer? Get in touch.
Yes. Splashpanel and Proplas panels are made from PVC plastic and are completely waterproof. If the panels are to be used in a wet or humid environment, we always recommend using silicone sealant between the panel joints to avoid water getting behind the panels.
Yes. Splashpanel and Proplas panels can be fitted by a competent DIY person with no need for a professional. The added benefit is the ability to fit the product using general DIY tools.
Yes. You can fit the Splashpanel directly to tiles as long as the tiles are secure and flat. We recommend that tiles are well cleaned and ideally sanded/roughed first to allow our adhesive to take a strong hold.
Yes. All panels are provided with full installation instructions and should be adhered to when installation takes place. Our installation guides can be downloaded from our installation section.
Splashpanel and Proplas panels must not be stored vertically, leant against walls or any object as the flexible nature of the panels may induce bowing. The panels must be stored flat on a dry, surface within a normal heated room environment. Handle the panels with care to avoid damage and when lifting it is recommended that 2 persons lift the panels and appropriate care is taken to avoid any injury.
A range of installation and finishing accessories are available to complement your Splashpanel and Proplas PVC products, they ensure a trouble free watertight installation and ongoing high performance of the panels. Please ensure the recommended panel adhesive, high quality sealant and accessories are purchased prior to commencing your installation.
Splashpanel Panel Weight: Approx 11 kg including packaging.
Proplas PVC Panel Weight: 8mm Approx – 8.0 kg per mini pack of 4 panels
Proplas PVC Panel Weight: 10mm Approx – 10.0 kg per mini pack of 4 panels
Splashpanel Panel Size (All dimensions are nominal)
2400mm (H) x 1000mm (W) x 10mm (T)
2400mm (H) x 1200mm (W) x 10mm (T)
Dimension Tolerances.
Height- 0 to + 20mm
Width + / – 3.0mm
Thickness + / – 0.5mm
Squareness +/- 1.5mm
Proplas Panel Sizes (All dimensions are nominal)
2700mm (L) x 250mm (W) x 8mm (T)
2700mm (L) x 250mm (W) x 10mm (T)
Dimension Tolerances
Length – 0 to + 20mm
Width + / – 2.0mm
Thickness + / – 0.2mm
Squareness +/- 1.5mm per linear meter of length.
Yes. Invariably sealants can break down over time. It is essential to ensure sealant is maintained to avoid water getting behind the panels.
The surface of Splashpanel and Proplas panels can be hygienically cleaned with either the Splashpanel or Proplas spray cleaner, which is a mild non-abrasive cleaner with an antibacterial agent.
No. Splashpanel is extruded PVC which has a corrugated structure. PVC material is much lighter than many other composite panels making it easier to handle and install.
Yes. EN 13245-2:2008 Plastic- Unplasticized polyvinylchloride PVC-U profiles for building applications and internal wall linings. System 4 EC – CoC – IN-SH-CP-5612-13015
Yes. Fire Rating tested to BS EN 13501-1:2007 achieving an F.R classification of C, s3, d0
Both Splashpanel and Proplas PVC panels have an element of resistance to both artificial and natural UV light but they are not however ultimately UV light stable and therefore fading of panels may occur over time due to direct sunlight.
To minimise this effect it is recommended that curtains or blinds are used as necessary during prolonged periods of direct sunlight.
Yes. Proplas is the ideal product for covering Artex ceiling and walls and provides a quick cost effective alternative to tiles and plaster.
Yes. Proplas can be cut to size using a fine tooth hacksaw or a sharp cutting knife.
Yes. Ceiling lights can be used, but Proplas PVC panels should not be subjected to temperatures exceeding 60 degrees Celsius. This can cause distortion/damage to the panel, the panel may also become discoloured and as such will void the associated warranty. The warranty documents are available to view on the downloads section of this website.
Correct care & maintenance is very important to the ongoing performance of the Proplas PVC Wall and Ceiling Panels.
Do –
Use a PVC compatible Anti Bacterial cleaner regularly.
Replace the accessible bottom edge silicone sealant periodically, or as necessary where normal degrade or discolouration occurs, to ensure a continuous waterproof seal at panel edges etc is achieved at all times. A silicone remover product is available to assist with this normal maintenance procedure.
In shower and bathroom areas, rinse your Proplas PVC panels down after use as a multitude of various chemicals can be present within personal hygiene, hair dyes & shampoo products used in showers & bathrooms and by rinsing these away it helps avoid issues such as discolouration of sealants etc.
Ensure adequate ventilation is present when using your shower or bath to avoid mould and mildew growth occurring.
Be careful to avoid banging hard objects against your Proplas panelling as the product is a relatively thin cellular structure product and damage could result.
Ensure that any mechanical fixings, such as screws, used to secure items to the panelling are located into the substrate or battens behind the panelling itself so as to ensure a suitably strong hold. As Proplas PVC is a thin hollow cellular structure material it is not designed to hold any fixings directly to it.
Don’t –
Use any form of abrasive cleaner as these types of cleaners may result in dulling of your panel surface and accelerated wear affects.
Use any form of bleach product to clean your Proplas PVC panels as chemicals contained in bleaches can be very harsh and again could affect the surface of your panel and sealant